28' Pacemaker Sportfish

with title.

28 foot 1973 Pacemaker, hand laid, fiberglass, twin engine sportfish hull

All railings, teak pulpit, and dive platform for this boat, the railings bring LOA to about 32'.

All areas below decks are painted with epoxy bilge paint, all rough edges sanded first.

All stringers refurbished with Epoxy and biax fiberglass, filled with foam, reinforced with 1" x 4" x 1/8" x 4' aluminum box channel where motor mounts are fastened.

All deck areas along the sides, bow, and foredeck, as well as the deck above the cabin have been professionally refurbished with new glass and inorganic filler material (Not wood).

Boat is in epoxy primer to protect the glass.

4" x 6" Solid Ipe motor mount supports

2" Copper bonding straps installed

New 1/8" welded aluminum fuel tanks, with baffles, installed 100 gal each

All upholstery and fold out sofa, dinette table. Refurbished and or recovered.

Bennett trim tabs with control switches and pumps

A lot of wire and wiring clips, shrink wrap, etc.

Exhaust tubing, mufflers, and fittings.

Struts (no cutless bearings.)

Rudders, reshafted with S/S shafts

1-1/4" drive shafts.

Steering control parts for rudder control

Used electrical panel with some old breakers

This boat has two forward bunks, a full shower and head, galley,

dinette that drops to make a bed, and fold out sofa.

Sleeps six.

Includes a 16,000 BTU Cruisair A/C

Kenyon 2 burner gas/elec galley

S/S driveshafts

Groco seacocks and strainers

Brand new dripless shaft seals

Reverso oil pump

Water tanks

No engines.